Fiberglass

Posted By :
Comments : Off
SURFACE PREPARATION:Degrease the surface with our antisilicone solvent SOLVENTE 102 and then sand it with medium sandpaper (n. 120-140). HULL: Apply one coat of FIBERGLASS PRIMER and wait at least 4 hours (at 20° C) - Apply one coat of...
...
EPOPLASTIC

EPOPLASTIC

Two components epoxy coating for steel, light alloy and fibreglass superstructures. Also ideal for anti osmosis cycle, when applied on PRIMEPOX, or as undercoat for EVERGLOSS enamel
...
EPOGEL

EPOGEL

Posted By :
Comments : Off
Epoxy solventless coating for interior surfaces of fibreglass boats. Makes interior surfaces waterproof. It stops osmosis caused by water absorption from the inside. Stop bad smells that fibreglass normally gives. Safe during...
...
FIBERGLASS PRIMER

FIBERGLASS PRIMER

Posted By :
Comments : Off
Primer for fibreglass hulls. Its components adhere strongly on the surface. It is perfect as a base for all types of antifoulings.
...