http://www.marlinpaint.com Yacht Paints Wed, 02 May 2012 14:27:31 +0000 http://wordpress.org/?v=2.9.2 en hourly 1 http://www.marlinpaint.com/en/prodotti/anivegetative/marlin-tf http://www.marlinpaint.com/en/prodotti/anivegetative/marlin-tf#comments Thu, 27 Aug 2009 11:34:08 +0000 admin http://127.0.0.1:8080/wordpress/?p=135 Self-polishing antifouling based on special highly effective resins, cuprous compounds and antislime agents, suitable for all kind of boats up to 25 knots of speed. Extremeley effectve, it can be applied on iron, wood or fibreglass hulls. It is not suitable for light alloy hulls.]]> http://www.marlinpaint.com/en/prodotti/anivegetative/marlin-tf/feed 0 http://www.marlinpaint.com/en/prodotti/anivegetative/super-505-antivegetativa-semidura http://www.marlinpaint.com/en/prodotti/anivegetative/super-505-antivegetativa-semidura#comments Fri, 28 Aug 2009 10:01:09 +0000 admin http://127.0.0.1:8080/wordpress/?p=146 Semi-hard antifouling, suitable for medium speed motorboats or boats used extremely frequently. Based on modified vinyl resins, cuprous oxide and antislime compounds. Not suitable for light alloy hulls.]]> http://www.marlinpaint.com/en/prodotti/anivegetative/super-505-antivegetativa-semidura/feed 0 http://www.marlinpaint.com/en/prodotti/anivegetative/marlin-hard-antivegetativa-a-matrice-dura http://www.marlinpaint.com/en/prodotti/anivegetative/marlin-hard-antivegetativa-a-matrice-dura#comments Fri, 28 Aug 2009 12:45:11 +0000 admin http://127.0.0.1:8080/wordpress/?p=159 MARLIN HARD hard matrix antifouling]]> http://www.marlinpaint.com/en/prodotti/anivegetative/marlin-hard-antivegetativa-a-matrice-dura/feed 0 http://www.marlinpaint.com/en/prodotti/anivegetative/marlin-cf-antivegetativa-per-lega-leggera http://www.marlinpaint.com/en/prodotti/anivegetative/marlin-cf-antivegetativa-per-lega-leggera#comments Fri, 28 Aug 2009 16:12:31 +0000 admin http://127.0.0.1:8080/wordpress/?p=180 Low solubility self-polishing antifouling. It is free from copper oxide. It does not cause corrosion because of galvanic couples, hence it is particularly suitable for light alloy or steel hulls. Do not apply on bare metal.]]> http://www.marlinpaint.com/en/prodotti/anivegetative/marlin-cf-antivegetativa-per-lega-leggera/feed 0 http://www.marlinpaint.com/en/prodotti/anivegetative/303-antivegetativa-economica-rossa http://www.marlinpaint.com/en/prodotti/anivegetative/303-antivegetativa-economica-rossa#comments Fri, 28 Aug 2009 16:17:08 +0000 admin http://127.0.0.1:8080/wordpress/?p=186 Traditional and cheap oxide red antifouling. It is very rich in copper and therfore very effective, despite its low price. Ideal for fishing boats or working boats. Not suitable for aluminium boats.]]> http://www.marlinpaint.com/en/prodotti/anivegetative/303-antivegetativa-economica-rossa/feed 0 http://www.marlinpaint.com/en/prodotti/anivegetative/velox-plus-antivegetiva-per-eliche-e-piedi http://www.marlinpaint.com/en/prodotti/anivegetative/velox-plus-antivegetiva-per-eliche-e-piedi#comments Fri, 28 Aug 2009 16:21:15 +0000 admin http://127.0.0.1:8080/wordpress/?p=190 Special antifouling paint for propellers, stern drives, shafts and other underwater metallic parts. It provides outstanding adhesion and efficacy. Resistant to galvanic currents, that are the main responsible of film detachments. Do not apply on other antifoulings.]]> http://www.marlinpaint.com/en/prodotti/anivegetative/velox-plus-antivegetiva-per-eliche-e-piedi/feed 0 http://www.marlinpaint.com/en/prodotti/anivegetative/flexy-antivegetativa-flessibile-per-gommoni http://www.marlinpaint.com/en/prodotti/anivegetative/flexy-antivegetativa-flessibile-per-gommoni#comments Fri, 28 Aug 2009 16:22:46 +0000 admin http://127.0.0.1:8080/wordpress/?p=192 Special flexible antifouling for inflatables and fibreglass, can be applied directly, without any primer.]]> http://www.marlinpaint.com/en/prodotti/anivegetative/flexy-antivegetativa-flessibile-per-gommoni/feed 0 http://www.marlinpaint.com/en/prodotti/anivegetative/marlin-white-antivegetativa-extra-bianca http://www.marlinpaint.com/en/prodotti/anivegetative/marlin-white-antivegetativa-extra-bianca#comments Fri, 28 Aug 2009 16:27:11 +0000 admin http://127.0.0.1:8080/wordpress/?p=198 New extra white antifouling. It is completely copper free, hence uitable also for aluminium boats. It gives an extremely smooth film and it has a very balance solubility; it is therefore suitable also for fast motorboats or racing boats. It gives outstanding protection against slime and all kinds of fouling.]]> http://www.marlinpaint.com/en/prodotti/anivegetative/marlin-white-antivegetativa-extra-bianca/feed 0 http://www.marlinpaint.com/en/prodotti/anivegetative/idron-antivegetiva-all%e2%80%99acqua http://www.marlinpaint.com/en/prodotti/anivegetative/idron-antivegetiva-all%e2%80%99acqua#comments Fri, 28 Aug 2009 16:28:37 +0000 admin http://127.0.0.1:8080/wordpress/?p=199 Innovative antifouling, water based, environmentally friendly being solvent free, but also copper free. It can be diluted with water and apply as a normal interior paint. It has nonetheless an outstanding efficacy against all types of biofouling, and it is suitable for all kind of boats, of any material.]]> http://www.marlinpaint.com/en/prodotti/anivegetative/idron-antivegetiva-all%e2%80%99acqua/feed 0 http://www.marlinpaint.com/en/prodotti/primers-prodotti/metal-primer-primer-mordente-per-metalli http://www.marlinpaint.com/en/prodotti/primers-prodotti/metal-primer-primer-mordente-per-metalli#comments Fri, 28 Aug 2009 16:53:50 +0000 admin http://127.0.0.1:8080/wordpress/?p=200 Adhesion primer for metal. It adheres perfectly on stainless steel, bronze and aluminium. Only one coat must be applied.]]> http://www.marlinpaint.com/en/prodotti/primers-prodotti/metal-primer-primer-mordente-per-metalli/feed 0 http://www.marlinpaint.com/en/prodotti/primers-prodotti/fiberglass-primer-per-vetroresina http://www.marlinpaint.com/en/prodotti/primers-prodotti/fiberglass-primer-per-vetroresina#comments Fri, 28 Aug 2009 16:57:23 +0000 admin http://127.0.0.1:8080/wordpress/?p=201 Primer for fibreglass hulls. Its components adhere strongly on the surface. It is perfect as a base for all types of antifoulings.]]> http://www.marlinpaint.com/en/prodotti/primers-prodotti/fiberglass-primer-per-vetroresina/feed 0 http://www.marlinpaint.com/en/prodotti/primers-prodotti/universal-primer http://www.marlinpaint.com/en/prodotti/primers-prodotti/universal-primer#comments Fri, 28 Aug 2009 16:58:45 +0000 admin http://127.0.0.1:8080/wordpress/?p=203 Primer based on vinyl resins, it gives high impermeability and has an excellent anticorrosive effect.]]> http://www.marlinpaint.com/en/prodotti/primers-prodotti/universal-primer/feed 0 http://www.marlinpaint.com/en/prodotti/primers-prodotti/primepox-primer-epossidico http://www.marlinpaint.com/en/prodotti/primers-prodotti/primepox-primer-epossidico#comments Fri, 28 Aug 2009 16:59:56 +0000 admin http://127.0.0.1:8080/wordpress/?p=204 Epoxy two components primer, anti-rust for iron and anticorrosive for light alloys and lead. It has good adhesion properties and it is an excellent protective coating. It is perfect as a base for ROSTAR, EPOPLASTIC AS and BARRIER.]]> http://www.marlinpaint.com/en/prodotti/primers-prodotti/primepox-primer-epossidico/feed 0 http://www.marlinpaint.com/en/prodotti/protettivi-prodotti/barrier-sistema-epossidico-strutturale http://www.marlinpaint.com/en/prodotti/protettivi-prodotti/barrier-sistema-epossidico-strutturale#comments Fri, 28 Aug 2009 17:10:43 +0000 admin http://127.0.0.1:8080/wordpress/?p=205 Special epoxy coating featuring strong adhesion, high permeability and long-term mechanical properties like resistance and flexibility. Ideal for osmosis treatment, anticorrosive coating for metals, painting of wooden boats, can be used as a strong glue.]]> http://www.marlinpaint.com/en/prodotti/protettivi-prodotti/barrier-sistema-epossidico-strutturale/feed 0 http://www.marlinpaint.com/en/prodotti/protettivi-prodotti/epogel-protettivo-atossico-per-gavoni-e-sentine http://www.marlinpaint.com/en/prodotti/protettivi-prodotti/epogel-protettivo-atossico-per-gavoni-e-sentine#comments Fri, 28 Aug 2009 17:15:26 +0000 admin http://127.0.0.1:8080/wordpress/?p=207 Epoxy solventless coating for interior surfaces of fibreglass boats. Makes interior surfaces waterproof. It stops osmosis caused by water absorption from the inside. Stop bad smells that fibreglass normally gives. Safe during application, no toxic or hazardous vapours. Can be applied in small closed spaces.]]> http://www.marlinpaint.com/en/prodotti/protettivi-prodotti/epogel-protettivo-atossico-per-gavoni-e-sentine/feed 0 http://www.marlinpaint.com/en/prodotti/protettivi-prodotti/epoplastic-fondo-epossidico http://www.marlinpaint.com/en/prodotti/protettivi-prodotti/epoplastic-fondo-epossidico#comments Fri, 28 Aug 2009 17:18:48 +0000 admin http://127.0.0.1:8080/wordpress/?p=209 Two components epoxy coating for steel, light alloy and fibreglass superstructures. Also ideal for anti osmosis cycle, when applied on PRIMEPOX, or as undercoat for EVERGLOSS enamel.]]> http://www.marlinpaint.com/en/prodotti/protettivi-prodotti/epoplastic-fondo-epossidico/feed 0 http://www.marlinpaint.com/en/prodotti/protettivi-prodotti/rostar-protettivo-epossicatramoso http://www.marlinpaint.com/en/prodotti/protettivi-prodotti/rostar-protettivo-epossicatramoso#comments Fri, 28 Aug 2009 17:20:45 +0000 admin http://127.0.0.1:8080/wordpress/?p=211 Tar-epoxy high built anticorrosive paint. It is suited to protect steel, light alloys, stainless steel hulls or underwater parts of boats from corrosion.]]> http://www.marlinpaint.com/en/prodotti/protettivi-prodotti/rostar-protettivo-epossicatramoso/feed 0 http://www.marlinpaint.com/en/prodotti/smalti-e-vernici/evergloss-smalto-e-vernice-poliuretanica http://www.marlinpaint.com/en/prodotti/smalti-e-vernici/evergloss-smalto-e-vernice-poliuretanica#comments Fri, 28 Aug 2009 18:57:15 +0000 admin http://127.0.0.1:8080/wordpress/?p=213 SMALTO: poliuretanico a due componenti non ingiallente, di altissima brillantezza che si mantiene inalterata per molti anni. E' adatto ad essere applicato su fianchi, coperta e tuga di imbarcazioni in vetroresina ed in ferro, legno e lega leggera con cicli eposiddici. Nei colori bianco e nero è disponibile anche in versione satinata. VERNICE: Vernice poluretanica bicomponente. Rappresenta il massimo per le sue caratteristiche meccaniche, brillantezza e resistenza alle intemperie in ambiente marino. Contiene una speciale sostanza che filtra i raggi UV ed è disponibile anche in versione satinata.]]> http://www.marlinpaint.com/en/prodotti/smalti-e-vernici/evergloss-smalto-e-vernice-poliuretanica/feed 0 http://www.marlinpaint.com/en/prodotti/smalti-e-vernici/kristal-smalto-e-vernice-monocomponente http://www.marlinpaint.com/en/prodotti/smalti-e-vernici/kristal-smalto-e-vernice-monocomponente#comments Fri, 28 Aug 2009 19:08:42 +0000 admin http://127.0.0.1:8080/wordpress/?p=220 (Italiano) SMALTO: Smalto poliuretanico monocomponente dotato di grande brillantezza, elasticità e durevolezza. VERNICE: Classica vernice flatting monocomponente, di grande brillantezza e lunga durata. E' disponibile anche in versione satinata.]]> http://www.marlinpaint.com/en/prodotti/smalti-e-vernici/kristal-smalto-e-vernice-monocomponente/feed 0 http://www.marlinpaint.com/en/prodotti/smalti-e-vernici/flexy-smalto-flessibile-per-gommoni http://www.marlinpaint.com/en/prodotti/smalti-e-vernici/flexy-smalto-flessibile-per-gommoni#comments Fri, 28 Aug 2009 19:11:24 +0000 admin http://127.0.0.1:8080/wordpress/?p=222 Single-can flexible enamel with excellent adhesion and good flexibility, especially studied for coating neoprene or hypalon inflatables.]]> http://www.marlinpaint.com/en/prodotti/smalti-e-vernici/flexy-smalto-flessibile-per-gommoni/feed 0 http://www.marlinpaint.com/en/prodotti/smalti-e-vernici/graniglia-antiskid http://www.marlinpaint.com/en/prodotti/smalti-e-vernici/graniglia-antiskid#comments Fri, 28 Aug 2009 19:14:43 +0000 admin http://127.0.0.1:8080/wordpress/?p=224 Special plastic grit, which adds antiskid properties to EVERGLOSS enamel.]]> http://www.marlinpaint.com/en/prodotti/smalti-e-vernici/graniglia-antiskid/feed 0 http://www.marlinpaint.com/en/prodotti/diluenti-prodotti/diluente-n-2-per-antivegetative http://www.marlinpaint.com/en/prodotti/diluenti-prodotti/diluente-n-2-per-antivegetative#comments Sat, 29 Aug 2009 14:43:11 +0000 admin http://127.0.0.1:8080/wordpress/?p=238 Thinners for the following products: MARLIN TF, MARLIN CF, SUPER 505, MARLIN HARD, MAXIMA, UNIVERSAL PRIMER]]> http://www.marlinpaint.com/en/prodotti/diluenti-prodotti/diluente-n-2-per-antivegetative/feed 0 http://www.marlinpaint.com/en/prodotti/prodotti-per-il-teak/detergente-per-teak http://www.marlinpaint.com/en/prodotti/prodotti-per-il-teak/detergente-per-teak#comments Fri, 28 Aug 2009 19:20:20 +0000 admin http://127.0.0.1:8080/wordpress/?p=226 Detergent to clean teak before applying brightener . Wet the surface and pour our TEAK CLEANER (diluted 90% water) on it, easing the operation with a brush. Rinse thoroughly the surface with water.]]> http://www.marlinpaint.com/en/prodotti/prodotti-per-il-teak/detergente-per-teak/feed 0 http://www.marlinpaint.com/en/prodotti/prodotti-vari/sverniciatore http://www.marlinpaint.com/en/prodotti/prodotti-vari/sverniciatore#comments Sat, 29 Aug 2009 14:54:32 +0000 admin http://127.0.0.1:8080/wordpress/?p=245 It is a special non-toxic compound that is able to soften the old coats of antifouling paint but not the gel coat or fibreglass.]]> http://www.marlinpaint.com/en/prodotti/prodotti-vari/sverniciatore/feed 0 http://www.marlinpaint.com/en/prodotti/prodotti-per-il-teak/ravvivante-per-teak http://www.marlinpaint.com/en/prodotti/prodotti-per-il-teak/ravvivante-per-teak#comments Fri, 28 Aug 2009 19:24:33 +0000 admin http://127.0.0.1:8080/wordpress/?p=228 Brightener to remove old layer of wood and bring the teak back to its natural colour. Wet very well the surface and pour on it our TEAK BRIGHTENER. Let it operate for a few minutes, easing the operation with a brush. Don’t let dry and rinse generously the surface.]]> http://www.marlinpaint.com/en/prodotti/prodotti-per-il-teak/ravvivante-per-teak/feed 0 http://www.marlinpaint.com/en/prodotti/prodotti-vari/sverniciatore-forte http://www.marlinpaint.com/en/prodotti/prodotti-vari/sverniciatore-forte#comments Sat, 29 Aug 2009 14:56:30 +0000 admin http://127.0.0.1:8080/wordpress/?p=247 It is a special non-toxic compound that is able to soften the old coats of antifouling paint but not the gel coat or fibreglass.]]> http://www.marlinpaint.com/en/prodotti/prodotti-vari/sverniciatore-forte/feed 0 http://www.marlinpaint.com/en/prodotti/prodotti-per-il-teak/teak-oil-scuro-colore-teak-verniciato-o-bagnato http://www.marlinpaint.com/en/prodotti/prodotti-per-il-teak/teak-oil-scuro-colore-teak-verniciato-o-bagnato#comments Sat, 29 Aug 2009 14:38:36 +0000 admin http://127.0.0.1:8080/wordpress/?p=232 Traditional impregnating oil for teak. Let the surface dry, when the wood is perfectly dry, apply our TEAK OIL. After 10 – 15 minutes from the application, take any excess oil off the surface with a cloth. Never let any excess of the product dry out. In case of first treatment, repeat the process after a few hours.]]> http://www.marlinpaint.com/en/prodotti/prodotti-per-il-teak/teak-oil-scuro-colore-teak-verniciato-o-bagnato/feed 0 http://www.marlinpaint.com/en/prodotti/prodotti-per-il-teak/teak-oil-w-chiaro-colore-naturale-teak http://www.marlinpaint.com/en/prodotti/prodotti-per-il-teak/teak-oil-w-chiaro-colore-naturale-teak#comments Sat, 29 Aug 2009 14:39:59 +0000 admin http://127.0.0.1:8080/wordpress/?p=234 Special impregnating oil for teak studied to keep the natural colour of the wood. Our TEAK OIL W is particularly indicated for the deck as it keeps the natural light colour of the teak. Our TEAK OIL gives the wood a warm colour, and is particularly indicated for sovrastructures, interiors.]]> http://www.marlinpaint.com/en/prodotti/prodotti-per-il-teak/teak-oil-w-chiaro-colore-naturale-teak/feed 0 http://www.marlinpaint.com/en/prodotti/diluenti-prodotti/diluente-n-1-per-smalti-sintetici http://www.marlinpaint.com/en/prodotti/diluenti-prodotti/diluente-n-1-per-smalti-sintetici#comments Sat, 29 Aug 2009 14:42:13 +0000 admin http://127.0.0.1:8080/wordpress/?p=236 Thinners for the following products: KRISTAL smalto, KRISTAL vernice]]> http://www.marlinpaint.com/en/prodotti/diluenti-prodotti/diluente-n-1-per-smalti-sintetici/feed 0 http://www.marlinpaint.com/en/prodotti/diluenti-prodotti/diluente-n-4 http://www.marlinpaint.com/en/prodotti/diluenti-prodotti/diluente-n-4#comments Sat, 29 Aug 2009 14:44:13 +0000 admin http://127.0.0.1:8080/wordpress/?p=239 Diluente per i seguenti prodotti: VELOX PLUS, METAL PRIMER, FLEXY antivegetativa, FLEXY smalto, EVERGLOSS (a pennello) FIBERGLASS PRIMER]]> http://www.marlinpaint.com/en/prodotti/diluenti-prodotti/diluente-n-4/feed 0 http://www.marlinpaint.com/en/prodotti/diluenti-prodotti/diluente-n-5-per-epossidici http://www.marlinpaint.com/en/prodotti/diluenti-prodotti/diluente-n-5-per-epossidici#comments Sat, 29 Aug 2009 14:45:18 +0000 admin http://127.0.0.1:8080/wordpress/?p=240 Thinners for the following products: EPOPLASTIC, EPOGEL, BARRIER, PRIMEPOX, ROSTAR, TAURUS]]> http://www.marlinpaint.com/en/prodotti/diluenti-prodotti/diluente-n-5-per-epossidici/feed 0 http://www.marlinpaint.com/en/prodotti/diluenti-prodotti/diluente-n-6-per-poliuretanici-a-spruzzo http://www.marlinpaint.com/en/prodotti/diluenti-prodotti/diluente-n-6-per-poliuretanici-a-spruzzo#comments Sat, 29 Aug 2009 14:46:18 +0000 admin http://127.0.0.1:8080/wordpress/?p=241 Thinners for the following products: EVERGLOSS (spraygun), FLEXY smalto (spraygun)]]> http://www.marlinpaint.com/en/prodotti/diluenti-prodotti/diluente-n-6-per-poliuretanici-a-spruzzo/feed 0 http://www.marlinpaint.com/en/prodotti/diluenti-prodotti/solvente-102-antisilicone http://www.marlinpaint.com/en/prodotti/diluenti-prodotti/solvente-102-antisilicone#comments Sat, 29 Aug 2009 14:47:10 +0000 admin http://127.0.0.1:8080/wordpress/?p=242 Antisilicone solvent.]]> http://www.marlinpaint.com/en/prodotti/diluenti-prodotti/solvente-102-antisilicone/feed 0 http://www.marlinpaint.com/en/prodotti/prodotti-vari/stucco-epossidico http://www.marlinpaint.com/en/prodotti/prodotti-vari/stucco-epossidico#comments Sat, 29 Aug 2009 14:52:05 +0000 admin http://127.0.0.1:8080/wordpress/?p=243 Two-can solventless epoxy filler, It does not shrink even when applied in thick layers. Low in weight because pf the fine glass bubbles contained. It can be used for filling directly on fibreglass surfaces coated with epoxy systems. The filler has an excellent resistance to seawater and is therefore also recommended for underwater areas of boats.]]> http://www.marlinpaint.com/en/prodotti/prodotti-vari/stucco-epossidico/feed 0 http://www.marlinpaint.com/en/prodotti/prodotti-vari/microsfere-di-vetro http://www.marlinpaint.com/en/prodotti/prodotti-vari/microsfere-di-vetro#comments Sat, 29 Aug 2009 14:58:05 +0000 admin http://127.0.0.1:8080/wordpress/?p=249 Special glass microsphere to be mixed with BARRIER for the pur pose of filling. Ideal when the area to be filled is particularly large.]]> http://www.marlinpaint.com/en/prodotti/prodotti-vari/microsfere-di-vetro/feed 0 http://www.marlinpaint.com/en/prodotti/prodotti-vari/microfibre-di-vetro http://www.marlinpaint.com/en/prodotti/prodotti-vari/microfibre-di-vetro#comments Sat, 29 Aug 2009 14:59:27 +0000 admin http://127.0.0.1:8080/wordpress/?p=251 Special glass microfibres that mixed with BARRIER produce a workable product that does not shrink, perfect for filling. It is extremely resistant to mechanical stress.]]> http://www.marlinpaint.com/en/prodotti/prodotti-vari/microfibre-di-vetro/feed 0 http://www.marlinpaint.com/en/prodotti/prodotti-vari/taurus http://www.marlinpaint.com/en/prodotti/prodotti-vari/taurus#comments Sat, 29 Aug 2009 15:01:04 +0000 admin http://127.0.0.1:8080/wordpress/?p=252 Epoxy two-can glue. It is incredibly strong on wood, fibreglass or cement. Ideal for gluing teak on fibreglass deck.]]> http://www.marlinpaint.com/en/prodotti/prodotti-vari/taurus/feed 0 http://www.marlinpaint.com/en/prodotti/prodotti-vari/pulisent http://www.marlinpaint.com/en/prodotti/prodotti-vari/pulisent#comments Sat, 29 Aug 2009 15:02:34 +0000 admin http://127.0.0.1:8080/wordpress/?p=254 Bilge cleaner with a slight scent of pine. Dilute at 10% in water.]]> http://www.marlinpaint.com/en/prodotti/prodotti-vari/pulisent/feed 0 http://www.marlinpaint.com/en/cicli-di-verniciatura/vetroresina http://www.marlinpaint.com/en/cicli-di-verniciatura/vetroresina#comments Sun, 30 Aug 2009 08:59:14 +0000 admin http://127.0.0.1:8080/wordpress/?p=256 FIBERGLASS COATING SYSTEM]]> http://www.marlinpaint.com/en/cicli-di-verniciatura/vetroresina/feed 0 http://www.marlinpaint.com/en/cicli-di-verniciatura/ferro-o-alluminio http://www.marlinpaint.com/en/cicli-di-verniciatura/ferro-o-alluminio#comments Sun, 30 Aug 2009 09:04:18 +0000 admin http://127.0.0.1:8080/wordpress/?p=258 SURFACE PREPARATION Remove rust and scales from the surface through sandblasting. Remove dust using a dry cloth or an air jet (do not use any solvent otherwise adhesion of the following coat can be impaired). If necessary degrease the surface with our antisilicone solvent SOLVENTE 102 before sandblasting. After this stage the painting cycle changes depending on [...]]]> http://www.marlinpaint.com/en/cicli-di-verniciatura/ferro-o-alluminio/feed 0 http://www.marlinpaint.com/en/cicli-di-verniciatura/bulbi-in-ghisa http://www.marlinpaint.com/en/cicli-di-verniciatura/bulbi-in-ghisa#comments Sun, 30 Aug 2009 09:07:57 +0000 admin http://127.0.0.1:8080/wordpress/?p=263 Remove rust and scales from the surface through sandblasting. Remove dust using a dry cloth or an air jet (do not use any solvent otherwise adhesion to the following coat can be impaired). If necessary degrease the surface with our antisilicone solvent SOLVENTE 102 before sandblasting. Apply one coat of PRIMEPOX. Where necessary apply one [...]]]> http://www.marlinpaint.com/en/cicli-di-verniciatura/bulbi-in-ghisa/feed 0 http://www.marlinpaint.com/en/cicli-di-verniciatura/legno http://www.marlinpaint.com/en/cicli-di-verniciatura/legno#comments Sun, 30 Aug 2009 10:11:32 +0000 admin http://127.0.0.1:8080/wordpress/?p=281 SURFACE PREPARATION The first step in the painting cycle of wooden boats is the priming of the wood with our epoxy protective coating BARRIER, which features great adhesion on wood and an excellent protective power. Sand the dry wooden surface with coarse sand paper (n.80-100), and apply 2-3 coats of BARRIER TRASPARENTE diluted with 50% of [...]]]> http://www.marlinpaint.com/en/cicli-di-verniciatura/legno/feed 0 http://www.marlinpaint.com/en/cicli-di-verniciatura/verniciatura-del-legno http://www.marlinpaint.com/en/cicli-di-verniciatura/verniciatura-del-legno#comments Sun, 30 Aug 2009 09:06:22 +0000 admin http://127.0.0.1:8080/wordpress/?p=261 After carefully sanding the wooden surface with medium sandpaper and dusting it, apply wet on wet 2-3 coats of our BARRIER TRASPARENTE diluted by 40-50% with our thinner DILUENTE N. 5, until the wood does not absorb anymore product. Let it dry for 48 hours and then sand the surface with medium sandpaper (n.120) in [...]]]> http://www.marlinpaint.com/en/cicli-di-verniciatura/verniciatura-del-legno/feed 0 http://www.marlinpaint.com/en/cicli-di-verniciatura/eliche-e-piedi http://www.marlinpaint.com/en/cicli-di-verniciatura/eliche-e-piedi#comments Sun, 30 Aug 2009 09:20:25 +0000 admin http://127.0.0.1:8080/wordpress/?p=271 SURFACE PREPARATION Sand the surface with rather coarse and sharp sandpaper (n. 80 – 100) or sandblast it. Do not use worn out sand paper or metallic brushes, as they would polish the metallic surface rather than forming fine engravings, necessary for a good adhesion. If needed, remove grease or oil stains using our SOLVENT 102 [...]]]> http://www.marlinpaint.com/en/cicli-di-verniciatura/eliche-e-piedi/feed 0 http://www.marlinpaint.com/en/cicli-di-verniciatura/osmosi http://www.marlinpaint.com/en/cicli-di-verniciatura/osmosi#comments Sun, 30 Aug 2009 09:18:02 +0000 admin http://127.0.0.1:8080/wordpress/?p=269 OSMOSIS TREATMENT Sandblast the hull with coarse sandpaper, until the gel-coat is completely removed, if it is covered with blisters. In case a few  are present among the inner layers as well, these must be opened with a chisel one by one. However if such bubbles are too many to be singularly treated, the first layer [...]]]> http://www.marlinpaint.com/en/cicli-di-verniciatura/osmosi/feed 0