Products
Self-polishing antifouling based on special highly effective resins, cuprous compounds and antislime agents, suitable for all kind of boats up to 25 knots of speed. Extremeley effectve, it can be applied on iron, wood or fibreglass hulls. It is not suitable for light alloy hulls.
Semi-hard antifouling, suitable for medium speed motorboats or boats used extremely frequently. Based on modified vinyl resins, cuprous oxide and antislime compounds.
Not suitable for light alloy hulls.
Hard Matrix antifouling with very slow solubility and an extremely smnooth surface. It is particularly suitable for fast motorboats (over 35 knots of speed) or racing sailing boats.
Not suitable for light alloy hulls.
Low solubility self-polishing antifouling. It is free from copper oxide. It does not cause corrosion because of galvanic couples, hence it is particularly suitable for light alloy or steel hulls. Do not apply on bare metal.
Self-polishing antifouling containing cuprous and highly effective organic biocides. The two components allow the use of very active and synergic compounds, so that Maxima has the broadest possible spectrum of action against barnacles, worms and seaweed. Not suitable for alluminium.
Traditional and cheap oxide red antifouling. It is very rich in copper and therfore very effective, despite its low price. Ideal for fishing boats or working boats. Not suitable for aluminium boats.
Special antifouling paint for propellers, stern drives, shafts and other underwater metallic parts. It provides outstanding adhesion and efficacy. Resistant to galvanic currents, that are the main responsible of film detachments. Do not apply on other antifoulings.
Special flexible antifouling for inflatables and fibreglass, can be applied directly, without any primer.
New extra white antifouling. It is completely copper free, hence uitable also for aluminium boats. It gives an extremely smooth film and it has a very balance solubility; it is therefore suitable also for fast motorboats or racing boats.
It gives outstanding protection against slime and all kinds of fouling.
Innovative antifouling, water based, environmentally friendly being solvent free, but also copper free.
It can be diluted with water and apply as a normal interior paint. It has nonetheless an outstanding efficacy against all types of biofouling, and it is suitable for all kind of boats, of any material.
Adhesion primer for metal. It adheres perfectly on stainless steel, bronze and aluminium. Only one coat must be applied. Roughen well the surface before application, sanding it with coarse sandpaper (n. 80).
Primer for fibreglass hulls. Its components adhere strongly on the surface. It is perfect as a base for all types of antifoulings.
Primer based on vinyl resins, it gives high impermeability and has an excellent anticorrosive effect.
Epoxy two components primer, anti-rust for iron and anticorrosive for light alloys and lead. It has good adhesion properties and it is an excellent protective coating. It is perfect as a base for ROSTAR, EPOPLASTIC AS and BARRIER.
Special epoxy coating featuring strong adhesion, high permeability and long-term mechanical properties like resistance and flexibility. Ideal for osmosis treatment, anticorrosive coating for metals, painting of wooden boats, can be used as a strong glue.
Epoxy solventless coating for interior surfaces of fibreglass boats. Makes interior surfaces waterproof. It stops osmosis caused by water absorption from the inside. Stop bad smells that fibreglass normally gives. Safe during application, no toxic or hazardous vapours. Can be applied in small closed spaces.
Two components epoxy coating for steel, light alloy and fibreglass superstructures. Also ideal for anti osmosis cycle, when applied on PRIMEPOX, or as undercoat for EVERGLOSS enamel.
Tar-epoxy high built anticorrosive paint. It is suited to protect steel, light alloys, stainless steel hulls or underwater parts of boats from corrosion.
ENAMEL: Non-yellowing two-can polyurethane enamel very resistant to salt and sunlight. Can be applied on topside, deck and superstructures of fibreglass boats and on wood or light alloy painted with epoxy system. It can also be applied on old alkyd or one-can polyurethane enamels after sanding the surface.
VARNISH: Two-can clear varnish, very resistent to salt and sun light. Can be applied directly on wood after suitable sanding or after priming the surface with our BARRIER, a special epoxy coating. It contains a special UV filter and it is available also in satinized version.
ENAMEL: Non-yellowing single-can polyurethane enamel with great brightness, elasticity and durability.
VARNISH: It is a flatting monocomponent varnish with a great brightness and elasticity. Contains a UV filter and it is also available in satinized version.
Single-can flexible enamel with excellent adhesion and good flexibility, especially studied for coating neoprene or hypalon inflatables.
Special plastic grit, which adds antiskid properties to EVERGLOSS enamel.
Thinners for the following products:
MARLIN TF, MARLIN CF, SUPER 505, MARLIN HARD, MAXIMA, UNIVERSAL PRIMER
Detergent to clean teak before applying brightener . Wet the surface and pour our TEAK CLEANER (diluted 90% water) on it, easing the operation with a brush. Rinse thoroughly the surface with water.
It is a special non-toxic compound that is able to soften the old coats of antifouling paint but not the gel coat or fibreglass.
Brightener to remove old layer of wood and bring the teak back to its natural colour. Wet very well the surface and pour on it our TEAK BRIGHTENER. Let it operate for a few minutes, easing the operation with a brush. Don’t let dry and rinse generously the surface.
It is a special non-toxic compound that is able to soften the old coats of antifouling paint but not the gel coat or fibreglass.
Traditional impregnating oil for teak. Let the surface dry, when the wood is perfectly dry, apply our TEAK OIL. After 10 – 15 minutes from the application, take any excess oil off the surface with a cloth. Never let any excess of the product dry out. In case of first treatment, repeat the process after a few hours.
Special impregnating oil for teak studied to keep the natural colour of the wood. Our TEAK OIL W is particularly indicated for the deck as it keeps the natural light colour of the teak. Our TEAK OIL gives the wood a warm colour, and is particularly indicated for sovrastructures, interiors.
Thinners for the following products:
Thinners for the following products:
VELOX PLUS, METAL PRIMER, FLEXY antifouling, FLEXY enamel, EVERGLOSS (brush) FIBERGLASS PRIMER
Thinners for the following products:
Thinners for the following products:
Antisilicone solvent.
Two-can solventless epoxy filler, It does not shrink even when applied in thick layers. Low in weight because pf the fine glass bubbles contained. It can be used for filling directly on fibreglass surfaces coated with epoxy systems. The filler has an excellent resistance to seawater and is therefore also recommended for underwater areas of boats.
Special glass microsphere to be mixed with BARRIER for the pur pose of filling. Ideal when the area to be filled is particularly large.
Special glass microfibres that mixed with BARRIER produce a workable product that does not shrink, perfect for filling. It is extremely resistant to mechanical stress.
Epoxy two-can glue. It is incredibly strong on wood, fibreglass or cement. Ideal for gluing teak on fibreglass deck.
Bilge cleaner with a slight scent of pine. Dilute at 10% in water.